Ever wondered what make Emeralds look the way they do? A large part of it is down to something called “inclusions”. These are basically the result of a material being trapped in the stone during its formation. Inclusions are considered to be flaws in other stones like diamonds which require complete clarity, but they are appreciated in the Emerald business and add to the stone’s charm and natural beauty. So here is a list of the most common inclusions found in emeralds.
Also known as feathers, fissures are a very common inclusion in emeralds. They are found in emeralds all over the world and so are not seen as undesirable unless they are large in quantity. They look like small cracks or fractures in the emerald – hence the name fissure – and occur naturally in the mineral, sometimes permeating throughout the gemstone. An overabundance of fissures, however, can compromise the durability of the stone and lead to chipping, so this is something to be cautious about.
Almost every Emerald that has ever been pulled from the ground will contain some sort of Fissure or tiny fractures. These inclusions are natural and are part of the Emerald but it is always desirable to reduce the visual impact of these fissures. That is why Emeralds are routinely treated using natural oil which hides the fissures.
Single-phase inclusion are rarer than the other two that we will talk about simply because it is not a common feature of Colombian emeralds. Single-phase inclusion can, however, be seen in Musakashi emeralds, which come from an emerald mine of the same name in Zambia. This inclusion looks like a collection of crystals in the stone and is the result of a mineral inclusion, as opposed to a liquid or a gas.
Two-phase inclusion can be found in Colombian emeralds as well as those from other regions. In a two-phase inclusion, we have a gas bubble trapped in liquid, which differs from the single-phase inclusion by not containing a mineral element. These inclusions are often characterised by their jagged appearance.
Three-phase inclusions are like a combination of single- and two-phase inclusions; they are often jagged-edged, and consist of a combination of liquid, gas, bubbles, halite salt (another name for rock salt) and crystals. These inclusions can be described as a pea-pod which is pointed at both ends; the pod is the liquid, gas bubble have formed inside and there is a crystal element also. Three-phase inclusions are especially common in Colombian emeralds – and as Colombia is the foremost emerald exporter in the world, this type of inclusion can be seen in many stones in circulation today.
Along with the inclusions being discussed below, the following are examples of what one can expect to see in an emerald:
Heb je je ooit afgevraagd waarom Emeralds eruitzien zoals ze eruitzien? Een groot deel ervan is te danken aan iets dat 'inclusies' wordt genoemd. Deze zijn in feite het resultaat van een materiaal dat tijdens de vorming in de steen vastzit. Insluitingen worden beschouwd als gebreken in andere stenen zoals diamanten die volledige helderheid vereisen, maar ze worden gewaardeerd in de Emerald -business en dragen bij aan de charme en natuurlijke schoonheid van de steen. Dus hier is een lijst met de meest voorkomende insluitsels in smaragden .
Ook bekend als veren, kloven zijn een veel voorkomende toevoeging aan smaragden. Ze worden over de hele wereld in smaragden aangetroffen en worden daarom niet als ongewenst beschouwd, tenzij ze in grote hoeveelheden voorkomen. Ze zien eruit als kleine scheurtjes of breuken in de smaragd – vandaar de naam spleet – en komen van nature voor in het mineraal, soms doordringend in de edelsteen. Een overvloed aan scheuren kan echter de duurzaamheid van de steen in gevaar brengen en leiden tot afbrokkelen, dus dit is iets om voorzichtig mee te zijn.
Bijna elke smaragd die ooit uit de grond is getrokken, zal een soort spleet of kleine breuken bevatten. Deze insluitsels zijn natuurlijk en maken deel uit van de smaragd, maar het is altijd wenselijk om de visuele impact van deze scheuren te verminderen. Daarom worden smaragden routinematig behandeld met natuurlijke olie die de kloven verbergt.
Eenfasige inclusie is zeldzamer dan de andere twee waar we het over zullen hebben, simpelweg omdat het geen algemeen kenmerk is van Colombiaanse smaragden. Eenfasige inclusie is echter te zien in Musakashi-smaragden, die afkomstig zijn van een smaragdmijn met dezelfde naam in Zambia. Deze insluiting ziet eruit als een verzameling kristallen in de steen en is het resultaat van een minerale insluiting, in tegenstelling tot een vloeistof of een gas.
Inclusie in twee fasen is te vinden in Colombiaanse smaragden en die uit andere regio's. Bij een tweefasige insluiting hebben we een gasbel gevangen in vloeistof, die verschilt van de enkelfasige insluiting door geen mineraal element te bevatten. Deze insluitsels worden vaak gekenmerkt door hun grillige uiterlijk.
Driefasige insluitsels zijn als een combinatie van een- en tweefasige insluitsels; ze hebben vaak scherpe randen en bestaan uit een combinatie van vloeistof, gas, bellen, halietzout (een andere naam voor steenzout) en kristallen. Deze insluitsels kunnen worden beschreven als een erwt-peul die aan beide uiteinden is gericht; de pod is de vloeistof, er zijn gasbellen gevormd binnenin en er is ook een kristalelement. Driefasige insluitsels komen vooral veel voor in Colombiaanse smaragden - en aangezien Colombia de belangrijkste smaragdexporteur ter wereld is, is dit type insluiting te zien in veel stenen die tegenwoordig in omloop zijn.
Naast de insluitsels die hieronder worden besproken, zijn de volgende voorbeelden van wat je kunt verwachten in een smaragd:
Was dit artikel behulpzaam?
13 mensen vonden dit artikel nuttig