Jade is a beautiful stone that can be many different colors including green, orange, or white. Most of us will have seen the Jade that is green in color. Jade however is a very popular and expensive stone and this has given rise to many fakes, imitations or treated Jades being seen in the market place. Ancient records show that the Chinese started to dye jade to improve the color in 13th century. If you are about to go shopping for jade or have an old piece of jade, here is an article that will help you tell if you have found the real thing.
Hold it up to a bright light. If possible, examine the internal structure with a X10 Loupe. Can you see little fibrous or granular, felt-like, asbestos-like intertwinings? If so, it’s probably genuine nephrite or jadeite. Chrysoprase, which is commonly used an imitation, is microcrystalline, so it will look homogenous. If you see anything resembling layers with the 10X loupe, you’re probably looking at jadeite that’s been “doubled” or even “tripled” (thin layer of gem-quality jadeite sometimes glued over a different base).
A specific density gravity test can be performed as described below, or you can judge the density less accurately by tossing the stone in the air and catching it in your palm. If it feels heavier than most stone pieces of the same size, it is more likely to be authentic jade.
Another way to judge density is to observe the sound of plastic beads gently tapping each other. If you have a piece of real jade, clink it against the stone in question. If it sounds like plastic beads, then the stone in question is probably fake.
Both jadeite and nephrite have a very high density (jadeite - 3.3; nephrite - 2.95). Density is measured by dividing the weight (in grams) by the volume (c.c.).
Hold the piece of jade in your hand. It should feel “cold, smooth and soap like to the touch”. It should take a while to get warm if it is real. However, this is very subjective, and most helpful when you can compare it to real jade of a similar shape and size.
Jadeite is very hard; it will scratch glass or even metal. Nephrite, however, can be much softer, so performing a scratch test improperly may damage a genuine piece. Use the blunt end of a pair of scissors and gently press down and draw a line on an area on the jade piece that is not visible (bottom or end of the piece). Avoid any weathering surfaces because these are much softer and can be easily damaged. If the scratch makes a white line, gently wipe it off (it might be metal residue from the scissors). Is there still a scratch? If so, it’s probably not authentic jade.
If it scratches glass or steel, it could still be many of the alternatives to jade as well, including the various forms of green quartz and prehnite.
Perform this test at your own risk. The piece may be very valuable, even if it’s not made from jade, and can lose significant value if scratched.
Even if you have real jade in your hands, it can still be treated by dyeing, bleaching, use of stabilizing polymers, and creating jade doublets and triplets. Jade is divided into three categories based on these possibilities:
Type A - natural, untreated, undergoes a traditional process (plum juice washing and polishing with beeswax), no “artificial treatments” (e.g. high temperature or high-pressure treatments), “true” color.
Type B - Chemically bleached to remove impurities, injected with polymer with the use of a centrifuge to enhance translucency, covered with hard and clear plastic like coating, subject to instability and discoloration over time because polymer gets broken down by heat or household detergent, still 100% real jade with 100% natural color.
Type C - chemically bleached, dyed to enhance color, subject to discoloration over time due to reaction with strong light, body heat or household detergent.
Jadeite and Nephrite Jade are genuine Jade. In New Zealand, Greenstone or Pounamuis highly regarded by Maori. Maori people recognize four main types of pounamu, identifying their color and translucence: kawakawa, kahurangi, Ä«nanga. These are all nephrite. They also regard a fourth type of pounamu - tangiwai- from Milford Sound which, although prized is actually bowenite and not truly jade in the eyes of the rest of the world.
Other materials passed off as jade include:
Aventurine Quartz
Chrysoprase (“Australian jade” - most of it comes from Queensland, Australia)
Malaysia Jade (permanently dyed translucent quartz that may be called by its color – Red Jade, Yellow Jade, Blue Jade)
Opaque Dolomite Marble (“Mountain Jade” - from Asia, dyed in vibrant colors)
spring scale (100 gram, 500 gram, or 2500 gram, depending on the weight of the piece(s) you’re testing)
bucket, big enough for you to dip your piece(s) of jade in
strings
pony tail holder
rubber bands
paper towel (to dry items)
Use crocodile clamps to grasp the jade item. If the scale doesn’t come with crocodile clamps, wrap the tested jade with a piece of string, a rubber band or a pony tail holder.
Lift the spring scale by its top handle and write down the weight of the jade item in air. (Note this should be a scale based on grams and therefore measuring force in dynes - c.g.s system)
Gently place the jade item completely into the water bucket and write down its weight in water. The clamp can touch the water; it shouldn’t significantly affect the weight. If you’re concerned, however, use one of the alternatives described above. Since the test is based on the difference in weight, as long as the string, band or pony tail holder remains on the jade both in the air and in the water, the difference will be the same.
Calculate the volume of jade item: weight in air then divide by 1000 (or 981 if you have a calculator handy) minus weight in water divided by 1000 (or 981 if you have a calculator handy). This gives the mass in grams in air and the apparent mass in water. Subtract the in water value from the air value, this gives you the volume in cc.
Calculate the density of the jade item: mass in air divided by volume. Jadeite has a density of 3.20-3.33 g/cc, while nephrite has a density of 2.98 - 3.33 g/cc.
J ade es una piedra hermosa que puede tener muchos colores diferentes, incluidos el verde, naranja o blanco. La mayoría de nosotros habrá visto el Jade que es de color verde. Sin embargo, Jade es una piedra muy popular y cara y esto ha dado lugar a muchas falsificaciones, imitaciones o Jades tratados que se ven en el mercado. Los registros antiguos muestran que los chinos comenzaron a teñir jade para mejorar el color en el siglo XIII. Si está por ir de compras de jade o tiene una pieza antigua de jade, aquí hay un artículo que lo ayudará a saber si lo ha encontrado de verdad.
Sosténgalo a una luz brillante. Si es posible, examine la estructura interna con una lupa X10. ¿Puedes ver pequeños entrelazamientos fibrosos o granulares, parecidos al fieltro y similares al amianto? Si es así, probablemente sea nefrita o jadeíta genuina. La crisoprasa, que se usa comúnmente como imitación, es microcristalina, por lo que se verá homogénea. Si ves algo parecido a capas con la lupa 10X, probablemente estés mirando a la jadeita que ha sido "doblada" o incluso "triplicada" (una delgada capa de jadeíta de calidad gema a veces pegada sobre una base diferente).
Se puede realizar una prueba de densidad específica de gravedad como se describe a continuación, o puede juzgar la densidad con menos precisión arrojando la piedra en el aire y atrapándola en la palma de la mano. Si se siente más pesado que la mayoría de las piezas de piedra del mismo tamaño, es más probable que sea auténtico jade.
Otra forma de juzgar la densidad es observar el sonido de las cuentas de plástico tocando suavemente entre sí. Si tienes un pedazo de jade real, tíralo contra la piedra en cuestión. Si suena como cuentas de plástico, entonces la piedra en cuestión es probablemente falsa.
Tanto la jadeita como la nefrita tienen una densidad muy alta (jadeíta - 3.3; nefrita - 2.95). La densidad se mide dividiendo el peso (en gramos) por el volumen (cc).
Mantenga el pedazo de jade en su mano. Debería sentirse "frío, suave y similar al jabón al tacto". Debería tomar un tiempo calentar si es real. Sin embargo, esto es muy subjetivo y más útil cuando puedes compararlo con jade real de una forma y tamaño similar.
Jadeíta es muy difícil; rayará el vidrio o incluso el metal. La nefrita, sin embargo, puede ser mucho más suave, por lo que realizar una prueba de arañazo incorrectamente puede dañar una pieza genuina. Use el extremo romo de un par de tijeras y presione suavemente hacia abajo y dibuje una línea en un área de la pieza de jade que no es visible (parte inferior o final de la pieza). Evite las superficies de intemperie porque son mucho más suaves y pueden dañarse fácilmente. Si el arañazo forma una línea blanca, límpiela suavemente (podría ser un residuo metálico de las tijeras). ¿Todavía hay un rasguño? Si es así, probablemente no sea auténtico jade.
Si araña el vidrio o el acero, también podría haber muchas alternativas al jade, incluidas las diversas formas de cuarzo verde y prehnita.
Realice esta prueba bajo su propio riesgo. La pieza puede ser muy valiosa, incluso si no está hecha de jade, y puede perder un valor significativo si se raya.
Incluso si tiene jade verdadero en sus manos, aún puede tratarse mediante tinción, decoloración, uso de polímeros estabilizadores y la creación de dobletes y tripletes de jade. Jade se divide en tres categorías basadas en estas posibilidades:
Jadeita y Nephrite Jade son genuinos Jade. En Nueva Zelanda, Greenstone o Pounamuis son muy apreciados por los maoríes. Los maoríes reconocen cuatro tipos principales de pounamu, identificando su color y translucidez: kawakawa, kahurangi, Ä nanga. Estos son todos nefrita. También consideran un cuarto tipo de pounamu - tangiwai- de Milford Sound que, aunque es muy apreciado, en realidad es bowenita y no es verdaderamente jade a los ojos del resto del mundo.
Otros materiales pasados como jade incluyen:
¿Te resultó útil este artículo
11 personas encontraron útil este artículo